---
title: FlexPro™ Installation
description: "**Step 1:** FlexPro comes in various panel configurations, such as roll and stick package options. Apply the FlexPro Ridge Vent to metal roof by removing the backing paper. **Step 2**: Align the FlexPro Ridge Vent 1/2”-1” up-slope from the edge of…"
url: "https://marcoindustries.com/installation-questions/flexpro-installation/"
updated: "2023-10-05"
category: Ventilation
---

# FlexPro™ Installation

**Step 1:** FlexPro comes in various panel configurations, such as roll and stick package options. Apply the FlexPro Ridge Vent to metal roof by removing the backing paper.

**Step 2**: Align the FlexPro Ridge Vent 1/2”-1” up-slope from the edge of the ridge cap. Place onto metal roof with adhesive side down. *Note that the adhesive is strong and once put in place it will be hard to move. Be sure the FlexPro Ridge Vent is in place the first time.*

**Step 3**: When attaching consecutive FlexPro Vents, butt fit the pieces together. Marco’s Weather-Tite Metal Roof Sealant can be used to seal the butt joint. Place ridge cap over FlexPro. Secure in place with Marco QuickGrip/QuickDrill fasteners. Fasten through the metal roof ridge locations using a min. 3300 rpm screw gun, while avoiding penetrating the FlexPro material.