Search
Close this search box.
QuikDrill Self Drilling Fasteners

QuikDrill™

QuikDrill fasteners are ideal for attaching metal roofs, sidewalls, and other metal panels with superior Marco performance.

QuikDrill Metal2Metal Specs

These self-drilling screws are ideal for light-to-medium gauge metal-to-metal applications. Our QuikDrill Metal2Metal drill points are designed to penetrate a wide variety of metal thicknesses. QuikDrill #3 points utilize a chisel flute that speeds up drilling time and eliminates point walking.

Metal2Metal
Size Head Carton Qty Weight/M
12 x 1" 5/16" HWH 2500 12.21 lbs
12 x 1-1/2" 5/16" HWH 2000 15.85 lbs
12 x 2" 5/16" HWH 1500 19.15 lbs
14 x 7/8" 5/16" HWH 2500 13.00 lbs
*Not sold with sealing washer.
Pull Out Strength (LBS ULT)
Material
Designation HRS Primed Only G-90 Galvanized
NOM. GAUGE 16 14 12 22 18 16 14 12
THICKNESS .065 .070 .106 .031 .047 .060 .072 .101
#12 805 1128 1495 256 455 619 785 1446
Point Diameter Drill Point Major Diameter Minor Diameter Head Across Flat Washer Face Diameter
#12 #3 .209 / .215 .157 / .165 .305 / .310 .440 / .460
#14 Stitch #1 .240 / .246 .185 / .192 .306 / .312 .396 / .432
Pull Over Strength (LBS ULT)
Material
Designation AZ55 Galvalume
NOM. GAUGE 26 24 22 20
THICKNESS .019 .024 .032 .038
#12 with 15mm Washer 644 904 1144 1400
Washer Sizes Washer Sizes Drilling Capacity
#12 OD #14 Stitch OD #12
15mm Bonded Washer 14mm Bonded Washer .035" - .21"

Clipscrews

Clipscrew Metal2Metal

QuikDrill Metal2Metal ClipScrews Specs
Our QuikDrill Metal2Metal ClipScrews are designed to attach standing-seam roof clips to steel purlins or frames. The special low-profile design features pancake heads and a deep thread that pulls the fastener tighter and resists pull out. As a result, you won’t get the dimpled roof panels and loose panel problems typically caused by regular profile heads that don’t fasten tight. Like all Marco ClipScrews, our QuikDrill Metal2Metal ClipScrews come standard with 8-micron electroplating for exceptional lubricity, wear resistance, and excellent durability.

Size Head Carton Qty Weight/M
10 x 1" #2 Phillips Square Pancake 5000 7.38
10 x 1-1/2" #2 Phillips SquarePancake 2500 10.03
10 x 2" #2 Phillips SquarePancake 2000 15.45
Point Diameter Drill Point Major Diameter Minor Diameter Head Diameter Nominal Tensile Minimum Torsional Nominal Shear
#10 #3 .194 / .188 .133 / .126 .447 / .423 1550 lbs 61 in-lbs 1050 lbs
Pull Out Strength (LBS ULT)
Material
Designation HRS Primed Only
Nom. Gauge 12 14 16
Thickness .105 .075 .060
#10 1271 1032 723

Installation Tip

Always choose the appropriate fastener for the thickness and type of material to be drilled for any given application. To ensure optimum fastening performance, a 1900 to 2500 RPM screw gun rated 6 amps or more and fitted with a properly adjusted depth-locating nosepiece should be used. Sufficient pressure must be applied while screw gun is perpendicular to the working area. Overdriving fasteners can lead to leaks and other problems.

A lobe socket grips the fastener on 6 sides to prevent paint chipping, which leads to rust. The nosepiece of the drill needs to be set to the correct height for proper washer installation.

QuikDrill Installation Tip - Correct

Correct:
Drive fastener level to metal surface.

QuikDrill Installation Tip - Incorrect

Incorrect:
Fastener not level with metal surface.

Related Products

Related Products

QuikGrip

Get proven Marco quality in a wide variety of fasteners designed specifically for superior performance in metal-to-wood applications.
Additional Resources

ADDITIONAL RESOURCES​​

VENTILATION CALCULATOR​​

Calculate the exact amount of ventilation needed for a well-balanced system.

TECHNICAL TOOLS​​

Dive deep into product sheets, diagrams, and full spec breakdowns. 

Roofing FAQ

Learn everything you need to know about ventilation.

Marco Industries