QuikDrill™ Self-Drilling Fasteners
QuikDrill fasteners are ideal for attaching metal roofs, sidewalls and other metal panels with superior Marco performance.

These self-drilling screws are ideal for light- to medium-gauge metal-to-metal building applications and feature drill points designed to penetrate a wide variety of metal thicknesses. QuikDrill #2 and #3 points utilize a chisel flute that speeds up drilling time and eliminates point walking. The #10, #12 and #14 HWH are available with or without a bonded sealing washer.
Always choose the appropriate fastener for the thickness and type of material to be drilled for any given application. To ensure optimum fastening performance, a 1900 to 2500 RPM screw gun rated 6 amps or more and fitted with a properly adjusted depth-locating nosepiece should be used. Sufficient pressure must be applied while screw gun is perpendicular to the working area. Overdriving fasteners can lead to leaks and other problems.
A lobe socket grips the fastener on 6 sides to prevent paint chipping which leads to rust. The nosepiece of the drill needs to be set to the correct height for proper washer installation.
Correct: Drive fastener level to metal surface.
Incorrect: Fastener not level with metal surface.
QuikDrill Metal2Metal Specs
These self-drilling screws are ideal for light- to medium-gauge metal-to-metal building applications and feature drill points designed to penetrate a wide variety of metal thicknesses. QuikDrill #2 and #3 points utilize a chisel flute that speeds up drilling time and eliminates point walking. The #10, #12 and #14 HWH are available with or without a bonded sealing washer.
Size | Head | Carton Qty | Weight/M |
---|---|---|---|
*10 - 16 x 1/2" | 5/16" HWH | 10000 | 5.0 |
*10 - 16 x 5/8" | 5/16" HWH | 10000 | 5.7 |
10 - 16 x 3/4" | 5/16" HWH | 5000 | 6.3 |
10 - 16 x 1" | 5/16" HWH | 5000 | 7.6 |
12 - 14 x 3/4" | 5/16" HWH | 2500 | 8.4 |
12 - 14 x 1" | 5/16" HWH | 2500 | 10.0 |
12 - 14 x 1-1/4" | 5/16" HWH | 2500 | 11.8 |
12 - 14 x 1-1/2" | 5/16" HWH | 2500 | 13.3 |
12 - 14 x 2" | 5/16" HWH | 2000 | 16.7 |
12 - 14 x 2-1/2" | 5/16" HWH | 1500 | 21.4 |
12 - 14 x 3" | 5/16" HWH | 1000 | 25.0 |
12 - 14 x 4" | 5/16" HWH | 500 | 30.3 |
14 - 14 x 3/4" | 3/8" HWH | 2500 | 12.5 |
1/4 - 14 x 1" | 3/8" HWH | 2500 | 15.2 |
1/4 - 14 x 1-1/4" | 3/8" HWH | 2000 | 17.5 |
1/4 - 14 x 1-1/2" | 3/8" HWH | 2000 | 19.6 |
1/4 - 14 x 2" | 3/8" HWH | 1500 | 23.8 |
1/4 - 14 x 2-1/2" | 3/8" HWH | 1500 | 30.0 |
1/4 - 14 x 3" | 3/8" HWH | 1000 | 33.2 |
1/4 - 14 x 4" | 3/8" HWH | 500 | 41.9 |
1/4 - 14 x 5" | 3/8" HWH | 500 | 50.7 |
1/4 - 14 x 6" | 3/8" HWH | 500 | 53.0 |
12 - 14 x 3/4" | 5/16" CHWH | 2500 | 11.8 |
12 - 14 x 1" | 5/16" CHWH | 2500 | 12.5 |
12 - 14 x 1-1/4" | 5/16" CHWH | 2500 | 14.1 |
12 - 14 x 1-1/2" | 5/16" CHWH | 2000 | 15.9 |
12 - 14 x 2" | 5/16" CHWH | 1500 | 21.3 |
1/4 - 14 x 7/8" stitch | 5/16" CHWH | 2500 | 13.0 |
Pull Out Strength (LBS ULT) | ||||||||
---|---|---|---|---|---|---|---|---|
Material | ||||||||
Designation | HRS Primed Only | G-90 Galvanized | ||||||
NOM. GAUGE | 16 | 14 | 12 | 22 | 18 | 16 | 14 | 12 |
THICKNESS | .065 | .070 | .106 | .031 | .047 | .060 | .072 | .101 |
#10 | 580 | 922 | 1405 | 211 | 473 | 680 | 890 | 580 |
#12 | 423 | 783 | 1223 | 238 | 438 | 584 | 764 | 1163 |
1/4* | 524 | 850 | 1424 | 218 | 420 | 603 | 742 | 1221 |
Point Diameter | Drill Point | Major Diameter | Minor Diameter | Head Across Flat | Washer Face Diameter | |
---|---|---|---|---|---|---|
#10 | #2 | .189 / .183 | .141 / .135 | .312 / .305 | .398 / .432 | |
#12 | #2.5 | .215 / .209 | .164 / .157 | .312 / .305 | .398 / .432 | |
#14 | #3 | .246 / .240 | .192 / .185 | .375 / .367 | .398 / .432 | |
#1/4" stitch | #1 | .246 / .240 | .192 / .185 | .305 / .312 | .398 / .432 |
Pull Over Strength (LBS ULT) | ||||
---|---|---|---|---|
Material | ||||
Designation | AZ55 Galvalume | |||
NOM. GAUGE | 26 | 24 | 22 | 20 |
THICKNESS | .019 | .024 | .032 | .038 |
#10 with 12mm Washer | 800 | 1167 | 1144 | 1688 |
#12 with 14mm Washer | 680 | 888 | 1273 | 1681 |
1/4" with 15mm Washer | 935 | 1132 | 1312 | 2015 |
Washer Sizes | ||||
---|---|---|---|---|
#10 HiLo | ||||
|
Drilling Capacity | |
---|---|
10 - 16 #2 | .035 - .110 |
10 - 16 #3 | .035 - .175 |
12 - 24 #2.5 | .050 - .210 |
1/4 - 14 #3 | .060 - .220 |
QuikDrill Metal2Metal HD Specs
The heavy-duty, self-drilling fasteners are designed for drilling .250 to .500 steel thickness in heavy-gauge applications. Assembled with optional galvanized, bonded EPDM washers, they are ideal for securing metal decks to structural steel, awnings, canopies, bar joists and retrofit clips. To penetrate steel thickness up to .5", use fastener lengths over 1-1/4". To drill up to .25", choose 12-24 x 7/8".
Size | Head | Drill Point | Carton Qty | Weight/M |
---|---|---|---|---|
*12 - 24 x 7/8" | 5/16" HWH | #4 | 2500 | 12.0 |
12 - 24 x 1-1/4" | 5/16" HWH | #5 | 2500 | 12.6 |
12 - 24 x 1-1/2" | 5/16" HWH | #5 | 2000 | 16.2 |
12 - 24 x 2" | 5/16" HWH | #5 | 1500 | 22.1 |
*1/4 - 20 x 3" | 5/16" HWH | #5 | 1000 | 29.5 |
*1/4 - 20 x 4" | 5/16" HWH | #5 | 500 | 36.0 |
*1/4 - 20 x 5" | 5/16" HWH | #5 | 500 | 43.6 |
*1/4 - 20 x 6" | 5/16" HWH | #5 | 500 | 51.9 |
Diameter | Drill Point | Major Diameter | Minor Diameter | Washer Face DIA | Head Across | Nominal Tensile | Minimum Torsional | Nominal Shear |
---|---|---|---|---|---|---|---|---|
#12 - 24 | #4, #5 | .215 / .209 | .164 REF | .432 / .398 | .311 / .305 | 3729 LBS | 150 IN-LBS | 2542 LBS |
1/4* - 20 | #5 | .215 / .209 | .192 REF | .520 / .480 | .375 / .367 | 4442 LBS | 205 IN-LBS | 3367 LBS |
Pull Out Strength (LBS ULT) | ||||
---|---|---|---|---|
Material | ||||
Designation | HRS Primed Only | |||
NOM. GAUGE | 14 | 12 | 3/16 | 1/4 |
THICKNESS | .070 | .106 | .187 | .250 |
#12 - 24 HD | 695 | 1264 | 2347 | 3816 |
Pull Over Strength (LBS ULT) | |||
---|---|---|---|
Material | |||
Designation | AZ55 Galvalume | ||
NOM. GAUGE | 26 | 24 | 22 |
THICKNESS | .019 | .024 | .032 |
#12 - 24 HD | 755 | 1164 | 1304 |
Washer Sizes | ||
---|---|---|
#10 | 12mm | OD |
#12 | 14mm | OD |
Drilling Capacity | |
---|---|
#4 | .125 - .250 |
#5 | .125 - .500 |
QuikDrill P2M
Our P2M fasteners are ideal for plywood-to-metal applications where either a #3 or #4 point is required for a clean cut. This winged fastener reams a hole in the wood to prevent the threads from engaging as you drill. When the fastener hits metal, the wings break off and threads engage the metal for a fast application and strong hold.