QuikGrip™ Metal-To-Wood Fasteners

Get proven Marco quality in a wide variety of fasteners designed specifically for superior performance in metal-to-wood applications.

QuikGrip Header

QuikGrip — Ultra Pro 20

Our Ultra Pro 20 fasteners are backed by a 20-year limited warranty. Their proprietary heat-cured alloy coating is applied to the entire surface of the fastener, offering maximum adhesion and corrosion resistance.

QuikGrip™ M2W
Metal2Wood
View Specs

QuikGrip Ultra Pro 20 Metal2Wood Specs
Our Metal2Wood fastener is designed to attach steel roofing and siding used in post-frame and residential metal roofing applications. A high-hex washer head provides driving stability, Hi-Lo threads deliver superior holding strength and the Type 17 point makes installation quick. High-quality mechanical zinc plating provides extended corrosion resistance while a bonded seal washer creates a truly Weather-Tite™ seal–even when driven at an angle.

Size Head Carton Qty Weight/M
10 x 1" 1/4" HWH 2500 8.250
10 x 1-1/2" 1/4" HWH 2500 10.321
10 x 2" 1/4" HWH 2000 12.495
10 x 2-1/2" 1/4" HWH 1500 15.068
10 x 3" 1/4" HWH 1000 16.867
12 x 3/4" STITCH 1/4" HWH 2500 10.587
12 x 1" 1/4" HWH 2500 10.5
12 x 1 1/2" 1/4" HWH 2500 13.9
12 x 2" 1/4" HWH 2000 16.5
12 x 2 1/2" 1/4" HWH 1500 20.6
12 x 3" 1/4" HWH 1000 24.7
All fasteners listed are available in the U.S. Also available in Canada
Pull Out Strength (LBS ULT)
Substrates
PLYWOOD OSB SOUTHERN PINE SPRUCE PINE FIR OAK HEMLOCK FIR
3/4" 5/8" 1/2" 7/16" 1" 1-1/2" 1" 1-1/2" 1" 1" 1-1/2"
#10 657 436 341 230 713 1741 676 1074 1895 694 795
#12 643 500 393 393 735 969 565 1017 -- -- --
Point Diameter Major Diameter Minor Diameter Head Across Flat Nominal Tensile Minimum Torsional Nominal Shear
#10 25º TYPE 17 .191 / .199 .127 / .133 .246 / .251 2440 LBS. 60 IN-LBS. 1575 LBS.
#12 25º TYPE 17 .220 / .230 .152 / .159 .246 / .251 3561 LBS. 95 IN-LBS. 2503 LBS.
Pull Over Strength (LBS ULT)
Material
Designation AZ55 Galvalume
Nom. Gauge 29 26 24
Thickness .015 .019 .024
#10 X .472 379 630 723
Washer Sizes
#10 HiLo
ID OD
.214" .472"
QuikGrip™ M2W HD
Metal2Wood HD
View Specs

QuikGrip Ultra Pro 20 Metal2Wood HD Specs
This is your heavy-duty fastener designed to withstand the stresses of demanding applications. EPDM rubber is bonded to the steel washer to prevent delaminating, forming a superior seal—even when driven at an angle. The 5/16" HWH with bonded sealing washer covers the existing hole completely, creating a watertight seal, even if stretched out by movement of the metal roof. And like our standard Metal2Wood fastener, mechanical zinc plating provides extended corrosion resistance.

Size Head Carton Qty Weight/M
14 x 1" 5/16" HWH 2500 8.250
14 x 1-1/2" 5/16" HWH 2000 10.321
14 x 2" 5/16" HWH 1500 12.495
Pull Out Strength (LBS ULT)
Substrates
PLYWOOD OSB SOUTHERN PINE SPRUCE PINE FIR OAK HEMLOCK FIR
3/4" 5/8" 1/2" 7/16" 1" 1-1/2" 1" 1-1/2" 1" 1" 1-1/2"
858 420 436 300 832 1620 774 1387 - 1014 1579
Point Diameter Major Diameter Minor Diameter Head Across Flat Nominal Tensile Minimum Torsional Nominal Shear
30º TYPE 17 .245 / .248 .178 / .185 .305 / .312 4272 LBS. 125 IN-LBS. 2995 LBS.
Pull Over Strength (LBS ULT)
Material
Designation AZ55 Galvalume 90 Galvanized
NOM. GAUGE 29 26 24 22 20
THICKNESS .015 .019 .024 .032 .038
14mm x .590 759 696 1190 1310 1585
Washer Sizes
#10 HiLo
ID OD
.275" .590"

QuikGrip — Specialty Parts

Our Ultra Pro 20 fasteners are backed by a 20-year limited warranty. Their proprietary heat-cured alloy coating is applied to the entire surface of the fastener, offering maximum adhesion and corrosion resistance.

QuikGrip™ M2W XD
Metal To Wood XD
View Specs

QuikGrip Metal2Wood XD Specs
Ideal for wood and light gauge metal with a pre-drilled hole. Our full range of carbon-steel, self-tapping screws deliver Marco quality proven in installations coast-to-coast.

Size Head Carton Qty Weight/M
14 x 1" 3/8" HWH 2000 16.91
14 x 1-1/4" 3/8" HWH 2000 17.63
14 x 1-1/2" 3/8" HWH 1500 24.60
14 x 2" 3/8" HWH 1000 26.02
14 x 2-1/2" 3/8" HWH 1000 30.80
14 x 3" 3/8" HWH 1000 35.91
17 x 3/4" - AB 3/8" HWH 2000 14.02
17 x 1" - AB 3/8" HWH 2000 18.00
17 x 1-1/2" 3/8" HWH 2000 22.03
Point Diameter Major Diameter Minor Diameter Head Diameter Nominal Tensile Minimum Torsional Nominal Shear
30º Sharp 14 .248 / .254 .178 / .185 .367 / .375 4281 LBS. 150 IN-LBS. 2999 LBS.
45º Sharp 17 .285 / .295 .215 / .225 .367 / .375 5167 LBS. 260 IN-LBS. 3957 LBS.
Pull Out Strength (LBS ULT)
Substrates
PLYWOOD OSB YELLOW PINE HEMLOCK SPRUCE HRS PRIME ONLY
3/4" 5/8" 1/2" 7/16" 1" 1-1/2" 1" 1-1/2" 16/.065 14/.070 12/.106
#14 858 534 356 325 765 1269 739 1234 1102 1561 2229
#17 -- -- -- -- -- -- -- - 1185 2248 3595
Pull Over Strength (LBS ULT)
Material
Designation AZ55 Galvalume G-90 Galvanized
NOM. GAUGE 29 26 24 22 20
THICKNESS .015 .019 .024 .032 .038
#14 x 15mm washers (.590") 559 892 1200 1275 1610
#17 x 16mm washers (.630") 559 892 1200 1275 1610
QuikGrip™ LoPro
LoPro™
View Specs

QuikGrip LoPro Specs
LoPro provides a quality, low-profile appearance on sidewall and roofing applications installed into wood substrates. Featuring a round head with a hexalobular internal drive, LoPro is specially designed to fit a standard T-25 internal drive bit. The undercut fastener head with the EPDM rubber washer provides a secure seal even when driven at an angle. And the yellow dichromate zinc plating delivers better corrosion resistance than standard-plated fasteners.

Size Head Carton Qty Weight/M
10 x 1-1/2" TRUSS 2500 10.1
10 x 2 1/2" TRUSS 1500 15.4
Point Diameter Major Diameter Minor Diameter Head Diameter Nominal Tensile Minimum Torsional Nominal Shear
25º TYPE 17 .191 / .199 .127 / .133 .487 / .511 2094 LBS. 56 IN-LBS. 2418 LBS.
Pull Out Strength (LBS ULT)
Substrates
PLYWOOD OSB SOUTHERN PINE SPRUCE PINE FIR OAK HEMLOCK FIR
3/4" 5/8" 1/2" 7/16" 1" 1-1/2" 1" 1-1/2" 1" 1" 1-1/2"
738 451 250 215 620 912 549 671 1465 690 883
Pull Over Strength (LBS ULT)
Material
Designation AZ55 Galvalume
NOM. GAUGE 29 26
THICKNESS .015 .019
#10 654 732
QuikGrip™ 300ss
300ss
View Specs

QuikGrip 300ss Specs
Our 300ss stainless steel HWH and bonded washer provides protection in the harshest environments. With its 25° sharp point, the 300SS is an excellent choice for use in aluminum liner panel applications and can also function well for animal confinement structures. Whatever the application, the HWH design holds the EPDM rubber washer to provide a protected seal, even when driven at an angle.

Size Head Carton Qty Weight/M
9 x 1" 1/4" HWH 2500 7.9
9 x 1-1/2" 1/4" HWH 2500 9.9
Point Diameter Major Diameter Minor Diameter Washer Face DIA Head Across Flat Nominal Tensile Nominal Shear
25º Sharp Point .175 / .181 .127 / .133 .338 / .35 .250 / .244 1134 LBS 1033 LBS
Pull Out Strength (LBS ULT)
Substrates
PLYWOOD OSB SOUTHERN PINE SPRUCE PINE FIR HEMLOCK FIR
3/4" 5/8" 1/2" 7/16" 1" 1-1/2" 1" 1-1/2" 1" 1-1/2"
687 413 399 119 675 1310 551 1044 760 1309
Pull Over Strength (LBS ULT)
Material
Designation AZ55 Galvalume
NOM. GAUGE 29 26
THICKNESS .015 .019
300ss Sharp Point 647 738
Washer Sizes
#9
ID OD
.214" .472"