Step 1: Tack/secure the end of the roll with a nail. Unroll the membrane 3–6 feet.
Step 2: Carefully remove the upper release liner, align the membrane and continue to peel the release liner from the membrane. Stop frequently to press the membrane in place with heavy hand or roller pressure.
Step 3: When finished with the desired length, repeat the process at the starting point by removing the remaining poly release film and pressing the membrane in place with heavy hand or roller pressure. Side laps (horizontal laps) must be a minimum of 3 inches and end laps a minimum of 6 inches.
Contact Marco for detailed installation instructions for valleys, ridges and ice dam protection.
